ABSTRACT Pedestrian networks play an important role in various applications, such as pedestrian navigation services and mobility modeling. This paper presents a novel method to extract pedestrian networks from crowdsourced tracking data based on a two-layer framework. This framework includes a walking pattern classification layer and a pedestrian network generation layer. In the first layer, we propose a multi-scale fractal dimension (MFD) algorithm in order to recognize the two different types of walking patterns: walking with a clear destination (WCD) or walking without a clear destination (WOCD). In the second layer, we generate the pedestrian network by combining the pedestrian regions and pedestrian paths. The pedestrian regions are extracted based on a modified connected component analysis (CCA) algorithm from the WOCD traces. We generate the pedestrian paths using a kernel density estimation (KDE)-based point clustering algorithm from the WCD traces. The pedestrian network generation results using two actual crowdsourced datasets show that the proposed method has good performance in both geometrical correctness and topological correctness. 相似文献
Methane content in coal seam is an essential parameter for the assessment of coalbed gas reserves and is a threat to underground coal mining activities. Compared with the adsorption-isotherm-based indirect method, the direct method by sampling methane-bearing coal seams is apparently more accurate for predicting coalbed methane content. However, the traditional sampling method by using an opened sample tube or collecting drill cuttings with air drilling operation would lead to serious loss of coalbed methane in the sampling process. The pressurized sampling method by employing mechanical-valve-based pressure corer is expected to reduce the loss of coalbed methane, whereas it usually results in failure due to the wear of the mechanical valve. Sampling of methane-bearing coal seams by freezing was proposed in this study, and the coalbed gas desorption characteristics under freezing temperature were studied to verify the feasibility of this method. Results show that low temperature does not only improve the adsorption velocity of the coalbed gas, but also extend the adsorption process and increase the total adsorbed gas. The total adsorbed methane gas increased linearly with decreasing temperature, which was considered to be attributed to the decreased Gibbs free energy and molecular average free path of the coalbed gas molecular caused by low temperature. In contrast, the desorption velocity and total desorbed gas are significantly deceased under lower temperatures. The process of desorption can be divided into three phases. Desorption velocity decreases linearly at the first phase, and then, it shows a slow decreases at the second phase. Finally, the velocity of desorption levels off to a constant value at the third phase. The desorbed coalbed gas shows a parabolic relation to temperature at each phase, and it increases with increasing temperature at the first phase, and then, it poses a declining trend with increasing temperature at the rest phases. The experimental results show that decreasing the system temperature can restrain desorption of coalbed methane effectively, and it is proven to be a feasible way of sampling methane-bearing coal seams.
The transfer and evolution of stress among rock blocks directly change the void ratios of crushed rock masses and affect the flow of methane in coal mine gobs. In this study, a Lagrange framework and a discrete element method, along with the soft-sphere model and EDEM numerical software, were used. The compaction processes of rock blocks with diameters of 0.6, 0.8, and 1.0 m were simulated with the degrees of compression set at 0%, 5%, 10%, 15%, 20%, and 25%. This study examines the influence of stress on void ratios of compacted crushed rock masses in coal mine gobs. The results showed that stress was mainly transmitted downward through strong force chains. As the degree of compression increased, the strong force chains extended downward, which resulted in the stress at the upper rock mass to become significantly higher than that at the lower rock mass. It was determined that under different degrees of compression, the rock mass of coal mine gobs could be divided, from the bottom to the top, into a lower insufficient compression zone (ICZ) and an upper sufficient compression zone (SCZ). From bottom to top, the void ratios in the ICZ sharply decreased and those in the SCZ slowly decreased. Void ratios in the ICZ were 1.2–1.7 times higher than those in the SCZ.
Natural Resources Research - In the past few decades, a variety of data-driven predictive modeling techniques has led to a dramatic advancement in mineral prospectivity mapping (MPM). The random... 相似文献
Natural Resources Research - A large ore loss and dilution can be expected when using a pre-blast ore boundary for shovel guidance because of the movement and re-distribution of ore in the muck... 相似文献
Yanchi County is located in the agro-pastoral ecotone and belongs to the ecologically fragile area of Northwest China.It is important to study the evolution of landscape pattern to curb its environmental degradation.In order to intuitively show how the landscape pattern of the study area changes over time,Landsat Thematic Mappers(TM)and Landsat Operational Land Imager(OLI)data of 1991,2000,2010 and 2017 were used.This paper attempts to apply niche theories and methods into landscape ecology,and constructs a niche model of landscape components by using"n-dimentional hypervolume niche theory"and landscape pattern indices.By evaluating the spatial and temporal evolution of niche from the perspective of two-dimensional space to reflect the changes of landscape pattern in the study area over the past 26 years,new theories and methods were introduced for the characterization of landscape pattern.The results indicate that:1)The larger the attribute and dominance value of landscape components,the higher the ecological niche and the stronger the control effect on the overall landscape.2)The ecological niche of each landscape component was significantly different,just as its control effect on the overall landscape.3)The dynamic change of the ecological niche of each landscape component was different,with grassland,unused land and arable land always in a high dominant position,although the ecological niche of construction land and water area was always low.In general,the introduction of niche theory into the landscape ecology provided a new method to study the changes in regional landscape pattern. 相似文献
Barley(Hordeum vulgare L.) is one of the earliest domesticated crop species and ranked as the fourth largest cereal production worldwide. Forward genetic studies in barley have greatly advanced plant genetics during the last century; however, most genes are identified by the conventional mapping method. Array genotyping and exome-capture sequencing have also been successfully used to target the causal mutation in barley populations, but these techniques are not widely adopted because of associated costs and partly due to the huge genome size of barley. This review summarizes three mapping cases of barley cuticle mutants in our laboratory with the help of RNA-sequencing. The causal mutations have been successfully identified for two of them and the target genes are located in the pericentromeric regions. Detailed information on the mapping-by-sequencing, mapping-and-sequencing, and RNA-sequencing assisted linkage mapping are presented and some limitations and challenges on the mapping assisted by RNA sequencing are also discussed. The alternative and elegant methods presented in this review may greatly accelerate forward genetics of barley mapping, especially for laboratories without large funding. 相似文献
Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order to quantify such influences, horizontal shear tests on the interfaces between different cushion materials and concrete raft under monotonic and cyclic loading were carried out. The vertical pressure P_v, material type and cushion thickness h_c were taken as variables. Conclusions include: 1) under monotonic loading, P_v is the most significant factor; the shear resistance P_(hmax) increases as P_v increases, but the normalized factor of resistance μ_n has an opposite tendency; 2) for the materials used in this study, μ_n varies from 0.40 to 0.70, the interface friction angle δ_s varies from 20° to 35°, while u_(max) varies from 3 mm to 15 mm; 3) under cyclic loading, the interface behavior can be abstracted as a "three-segment" back-bone curve, the main parameters include μ_n, the displacement u_1 and stiffness K_1 of the elastic stage, the displacement u_2 and stiffness K_2 of the plastic stage; 4) by observation and statistical analysis, the significance of different factors, together with values of K_1, K_2 and μ_n have been obtained. 相似文献
In the aggressive marine environment over a long-term service period,coastal bridges inevitably sustain corrosion-induced damage due to high sea salt and humidity.This paper investigates the strength reduction of coastal bridges,especially focusing on the effects of non-uniform corrosion along the height of bridge piers.First,the corrosion initiation time and the degradation of reinforcement and concrete are analyzed for bridge piers in marine environments.To investigate the various damage modes of the concrete cover,a discretization method with fiber cells is used for calculating time-dependent interaction diagrams of cross-sections of the bridge piers at the atmospheric zone and the splash and tidal zone under a combination of axial force and bending moment.Second,the shear strength of these aging structures is analyzed.Numerical simulation indicates that the strength of a concrete pier experiences dramatic reduction from corrosion initiation to the spalling of the concrete cover.Strength loss in the splash and tidal zone is more significant than in the atmospheric zone when structures’service time is assumed to be the same. 相似文献
